CPA Triplex H

CPA Triplex H medical vacuum systems are primarily used for hospital applications. Manufactured based on the industrial vacuum systems with triple lubricated rotary vane vacuum pump, the CPA Triplex H medical vacuum systems have been developed according to the requirements of EN ISO 7396-1 Standard.

 

 

Nominal capacity: 51.2 – 127.2 CFM

The CPA Triplex H systems are equipped with:

  • Three lubricated vacuum pumps complete with electric motor and exhaust filter on exhaust side. Pumps are fitted on a vertical support, so as to make the system as compact as possible
  • Vertical airtight painted tank made of welded steel, complete with condensate drainage valve and by-pass system for isolating it from the system
  • Three built-in check valve on suction side of the pump to maintain vacuum in the tank when pump is halted
  • Three FCM filters with metal bowl to protect the pump from drawing in any impure matters that may be within the system
  • Ball valve on suction side of each pump allows for it to be isolated for maintenance
  • Ball valve fitted on the tank fitting to isolate it from the system
  • Electric control panel
  • Absolute pressure sensor on tank
  • Vacuum gauge on the tank, for monitoring the vacuum level inside it
  • Emergency vacuum switch on the tank, electrically connected to the secondary section of the control panel that manages the emergency pump for its automatic operation (start/stop) in the event of an individual breakdown
  • Vacuum switch for insufficient vacuum alarm to be installed between the vacuum system and the user system
  • Manually controlled ball valve, on the tank coupling, to isolate the whole unit from the system.

Main application fields:
hospital sector.

CFM
U.S. gal
Torr / inHg
HP
51.2
79.3 *
3x LC 25
7.5 / 29.63
3x 1.2
GFB.50
51.2
132.1 *
3x LC 25
7.5 / 29.63
3x 1.2
GFB.50
84.8
132.1 *
3x LC 40
7.5 / 29.63
3x 1.8
GFB.100
132.5
132.1 *
3x LC 60
7.5 / 29.63
3x 2.4
GFB.100
* Vertical tank
** IE2 efficiency motor
*** IE3 efficiency motor

CONTACT US FOR INFORMATION


    * marked fields are mandatory